Products  
   
   
     
  Back to Products  
 
Ball Valve With Actuator  
 
     
 
Nishaka pneumatics is manufacturing 3 Pcs Design Investment Casting With Actuator Operated Ball Valves. and 2 pcs Design Investment Casting With Actuator Operated For Flanged ends Ball Valves .The flow control element of a ball valve is a ball with a round hole through it. The ball rotatates about an axis that is perpendicular to the hole and to the fluid path. The ball is always in the fluid path. However when the valve is open the hole aligns with fluid path, and the fluid passes straight through it and actuators are used on valves having rotating shafts. Single acting actuators can be given either for opening by air nor by spring pressure and valve will be closed by spring action or by air.In the double acting actuators opening and close both are by air pressure.
This product is using commonly pneumatic operated automation equipments.
 
     
 

 
Type 3 Pcs Design Investment Casting With Actuator Operated Ball Valves.
2 pc Design Investment Casting With Actuator Operated For Flanged ends Ball Valves .
Mfg. Std. BS-5351
Ends 1. Flanged ends to ASME B16.5 RF 150# & 300# /BS 10 Table D, E & F.,
2. Screwed ends to BSP/NPT
3. Triclover ends
4. Socket Weld ends
Manufacturing Range Sizes 1. ½” NB (15mm) To 6” NB (150mm) For Flanged ends
2. ½” NB (15mm) To 4” NB (100mm) For Triclover ends
3. ½” NB (15mm) To 3” NB ( 80mm) For Screwed ends
4. ½” NB (15mm) To 2” NB ( 50mm) For Socket weld ends
Up to 8” on request
Face To Face As per ASME B16.10. For Flanged ends.
Inspection & Testing BS 6755/ API-598
M. O .C. SS-316 (ASTM A-351 GR CF8M), SS-304 (ASTM A-351 GR CF8)
C.S (ASTM A-216 GR WCB) other material on request.
 
  Top  
 
 
Home | About Us | Products | Gallery | Enquiry | Contact Us
© 2012 Nishaka Pneumatics. All Rights Reserved.