Products  
   
  Pneumatic Rotary Actuator | Ball Valve With Actuator | Three Way Ball Valve With Actuator | Ball Valve Hand Lever Operated
PTFE Seat Butterfly Valve With Actuator | Pneumatic Two Way Control Valve | Pneumatic Three Way Control Valve | Y Type Control Valve
Wafer Type Centric Disc Butterfly Valve | Safety Valve Screwed End |
Spool Type Solenoid Valve | Solenoid Valve |
Rubber Seat Butterfly Valve With Actuator | Pneumatic Cylinder | Flow Control Valves | Wafer Type Non Return Valve
 
     
  Back to Products  
 
Spool Type Solenoid Valve  
 
     
 
Nishaka Pneumatics is manufacturing 3 way and 4 way Spool Type of solenoid Valves. And pneumatic solenoid valve is a switch for routing air to any pneumatic device, usually an actuator, allowing a relatively small signal to control a large device. It is also the interface between electronic controllers and pneumatic systems.
 
     
 

 
Type 3 way and 4 way Spool Type solenoid Valves.
Manufacturing Range Sizes 1/8” BSP / ¼” BSP/ ½” BSP
Orifice 5mm for 1/8” BSP,6.5mm For ¼” BSP And 12.5 for ½” BSP
Pressure 2.5 to 10 Kg/cm2
Media Air – Filtered and Lubricated
Body Anodized Aluminium Body
Brass & stainless steel Against Specific Orders
Manual Overdrive Optional
Data Epoxy Mounded, Water Proof, Continuous Duty Coils, 6 to 230 V AC &
9.5 Watts Low Watts as per request
   
   
Type 3 way and 4 way Spool Type Hand Lever Valves.
Manufacturing Range Sizes 1/8” BSP / ¼” BSP/ ½” BSP
Pressure 0 to 10 Kg/cm2
Media Air –Filtered and Lubricated
Body Powder Coated Aluminium Body
Operation Hand Lever
   
   
Type 3 way and 4 way Spool Type Push Pull Valves.
Manufacturing Range Sizes 1/8” BSP / ¼” BSP/ ½” BSP
Pressure 0 to 10 Kg/cm2
Media Air –Filtered and Lubricated
Body Powder Coated Aluminium Body
Operation Push or Pull
   
 
  Top  
 
 
Home | About Us | Products | Gallery | Enquiry | Contact Us
© 2012 Nishaka Pneumatics. All Rights Reserved.